Ann Arbor Plastics Terms of Service
Conditions of Use
References to Ann Arbor Plastics herein refer to Ann Arbor Plastics, Inc., aaplastics.com, or their affiliates, subsidiaries and designees as deemed appropriate by Ann Arbor Plastics.
Tampering with the site, misrepresenting the identity of a user, using buying agents or conducting fraudulent activities on the site are prohibited.
Disclaimers and Limitation of Liability
By using the Ann Arbor Plastics Web site, you expressly agree that use of the Ann Arbor Plastics Web site is at your sole risk. The Ann Arbor Plastics Web site is provided on an "AS IS" and "as available" basis. Neither Ann Arbor Plastics nor its parent company, affiliates, subsidiaries or designees nor each of their respective officers, directors, employees, agents, third-party content providers, designers, contractors, distributors, merchants, sponsors, licensors or the like (collectively, "Associates") warrant that use of the Ann Arbor Plastics Web site will be uninterrupted or error-free. Neither Ann Arbor Plastics nor its Associates warrant the accuracy, integrity or completeness of the content provided on the Ann Arbor Plastics Web site or the products or services offered for sale on the Ann Arbor Plastics Web site. Further, Ann Arbor Plastics makes no representation that content provided on the Ann Arbor Plastics Web site is applicable to, or appropriate for use in, locations outside of the United States. Ann Arbor Plastics and its Associates specifically disclaim all warranties, whether expressed or implied, including but not limited to warranties of title, merchantability or fitness for a particular purpose. No oral advice or written information given by Ann Arbor Plastics or its Associates shall create a warranty. Some states do not allow the exclusion or limitation of certain warranties, so the above limitation or exclusion may not apply to you.
Under no circumstances shall Ann Arbor Plastics or its Associates be liable for any direct, indirect, incidental, special or consequential damages that result from your use of or inability to use the Ann Arbor Plastics Web site, including but not limited to reliance by you on any information obtained from the Ann Arbor Plastics Web site that results in mistakes, omissions, interruptions, deletion or corruption of files, viruses, delays in operation or transmission, or any failure of performance. The foregoing Limitation of Liability shall apply in any action, whether in contract, tort or any other claim, even if an authorized representative of Ann Arbor Plastics has been advised of or should have knowledge of the possibility of such damages. User hereby acknowledges that this paragraph shall apply to all content, merchandise and services available through the Ann Arbor Plastics Web site. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Intended for Users Over 18
The Ann Arbor Plastics Web site is intended for use by individuals 18 years of age or older. The Ann Arbor Plastics Web site is not directed for use by children under the age of 18. Users under the age of 18 should get the assistance of a parent or guardian to use this site.Product Display/Colors
The Ann Arbor Plastics Web site attempts to display product images shown on the site as accurately as possible. However, we cannot guarantee that the color you see matches the product color, as the display of the color depends, in part, upon the monitor you are using.Errors on Our Site
Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Ann Arbor Plastics reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted and whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is cancelled, Ann Arbor Plastics will issue a credit to your credit card account in the amount of the charge. Individual bank policies will dictate when this amount is credited to your account. If you are not fully satisfied with your purchase, you may return it in accordance with Ann Arbor Plastics' Return Policy.Pricing Policy
Online prices and selection generally match those in our stores, but may vary. Prices and offers are subject to change.Online Price Guarantee
We will refund 100% of the difference if a price on aaplastics.com is reduced within 30 days of the shipping, pickup or special delivery date. You may receive the lower price only by calling 1-800-783-3674. We will honor the lower price only if it is displayed on our Web site when you notify us. Exclusions apply. For full details, see our online price guarantee in our Help section.Price Matching aaplastics.com Purchases with Our Stores
Our price matching policy also ensures you pay the lowest price for a product available at both aaplastics.com and Ann Arbor Plastics stores. (Ann Arbor Plastics stores in Puerto Rico do not price match aaplastics.com prices.) Price adjustments can be made both before and after purchase, according to these conditions:Sales Tax Policy
Ann Arbor Plastics collects and remits sales tax as required by U.S. law, for transactions in our stores and on aaplastics.com. If you're a tax-exempt entity, you can take advantage of tax-exempt status for applicable store purchases, as well as for applicable purchases made at aaplastics.com.
Ann Arbor Plastics for Business will also gladly assist you with placing a tax-exempt order. Please call 1-800-783-3674. Ann Arbor Plastics reserves the right not to sell to resellers.
For assistance with tax-exempt aaplastics.com transactions, please call Customer Care at 1-800-783-3674.Paying for Your Order
You may pay for your orders with Ann Arbor Plastics gift cards, or major credit cards issued in the United States of America. Currently, we accept Visa®, MasterCard®, American Express® and Discover® Card.
Generally, credit and debit card are not charged until we either ship the item(s) to you or confirm store availability (at which time you will be charged only for the goods we have actually shipped along with any appropriate taxes or shipping charges). However, we may pre-authorize your order amount with your credit or debit card issuer at the time you place the order, which may have an effect on your available credit line. Please contact your credit card issuer for more information.
If you ordered a special delivery item, you will be charged once a delivery time is confirmed.Using Gift Cards
Gift cards, unlike credit or debit cards, are debited at the time an order is placed. Gift cards will automatically be redeemed to purchase totals, up to the total purchase amount. In the event the total purchase amount exceeds the value of the gift card, you will be required to use another gift card or a credit or debit card to pay the difference. Any amount charged to a credit or debit card will be treated as set forth above. In the event of a partial return of an order using both a gift card and a credit or debit card, returned amounts shall first be credited to the credit or debit card, and any remaining balance will be credited back to the gift card. See our Help section for more details about returns.Validating Your Order
After you place an order using our shopping cart, we will check the information you give us for validity, by verifying your method of payment or shipping address. We reserve the right to reject any order you place with us, and/or to limit quantities on any order, without giving any reason. If we reject your order, we will attempt to notify you using the e-mail address you have given us with the order.
Your credit or debit card will normally not be charged if we reject an order, but we will process a refund if the charge has been made against your card.Order Acceptance/Confirmation
Your receipt of an electronic or other form of order confirmation does not signify our acceptance of your order, nor does it constitute confirmation of our offer to sell. The Ann Arbor Plastics Web site reserves the right at any time after receipt of your order to accept or decline your order for any reason.Return Policy
All sales made through the Ann Arbor Plastics Web site are subject to Ann Arbor Plastics' return policy. For a complete explanation of the return policy, please see Returns in our Help section.Order Limitations
We reserve the right to reject any order you place with us, and/or or to limit quantities on any order, without giving any reason. If we reject your order, we will generally attempt to notify you using the e-mail address you gave us when you placed the order.
Order Limitations/Limited Quantities
Ann Arbor Plastics may, at its own discretion, limit or cancel quantities purchased per person, per household or per order. Ann Arbor Plastics also reserves the right to reject any order you place with us. These restrictions may include orders placed by the same Ann Arbor Plastics Web site account, the same credit card, and orders that use the same billing and/or shipping address. In the event we make a change to an order, we will attempt to notify you by contacting the e-mail and/or billing address provided at the time the order was made. Ann Arbor Plastics reserves the right to limit or prohibit sales to dealers.Shipping
All orders placed on this site are subject to product availability and will be shipped according to Ann Arbor Plastics' shipping policies.
In the rare event that your order never arrives, notification of lost items must be received within 60 days from receipt of the shipping confirmation e-mail.
Please review the Shipping & Deliveries page in our Help section for additional information on shipping times, rates and policies.Termination of Use
Ann Arbor Plastics may, in its sole discretion, terminate your account or your use of the Ann Arbor Plastics Web site at anytime. You are personally liable for any orders that you place or charges that you incur prior to termination. Ann Arbor Plastics reserves the right to change, suspend or discontinue all or any aspects of the Ann Arbor Plastics Web site at any time without prior notice.Legal Notices
References to Ann Arbor Plastics herein refer to Ann Arbor Plastics, Inc., aaplastics.com, or their affiliates, subsidiaries and designees as deemed appropriate by Ann Arbor Plastics.
Ann Arbor Plastics reserves the right to make changes to its Legal Notices and Conditions of Use at any time. Each time you use the Ann Arbor Plastics Web site, you should visit and review the then current Legal Notices and Conditions of Use that apply to your use of this site and any transactions made while on the site. If you are dissatisfied with, its content or Legal Notices and Conditions of Use, you agree that your sole and exclusive remedy is to discontinue using the Ann Arbor Plastics Web site.
Tampering with the site, misrepresenting the identity of a user, using buying agents or conducting fraudulent activities on the site are prohibited.Right to Download
You may only download Content displayed on the Ann Arbor Plastics Web site for non-commercial, personal use provided you also retain all copyright, trademark and other proprietary notices contained in the material, do not modify or alter the material and do not copy or post the material on any network computer or broadcast the material in any media. It is strictly prohibited to modify, transmit, distribute, reuse, repost, "frame" or use the content of the Ann Arbor Plastics Web site including the text, images, audio and/or video for public or commercial purposes without written permission from an authorized representative of Ann Arbor Plastics. It is strictly prohibited to download the images of the products for sale within this site.Proprietary Rights
All content included on or comprising the Ann Arbor Plastics Web site including information, data, software, photographs, graphs, videos, typefaces, graphics, music, sounds and other material (collectively "Content") is protected by copyright, trademark, patent or other proprietary rights, and these rights are valid and protected in all forms, media and technologies existing now or developed in the future. All Content is copyrighted as a collective work under the U.S. and international copyright laws, and Ann Arbor Plastics owns, to the fullest extent allowed by such laws, the copyright in the selection, coordination, arrangement, and enhancement of all Content.
Except as expressly authorized or licensed, you may not copy, modify, remove, delete, augment, add to, publish, transmit, participate in the transfer or sale, lease or rental of, create derivative works from or in any way exploit any of the Content, in whole or in part.
One or more patents are pending that apply to this site.
The Ann Arbor Plastics logos and other trademarks on the site are the property of their respective owners and are owned by, licensed to, or, where required, used with permission by Ann Arbor Plastics and may not be reproduced, copied, or manipulated in any manner without the express, written approval of the trademark owner.
By using the Ann Arbor Plastics Web site, you agree that any information (except for purchase information), materials, suggestions, ideas or comments you send to Ann Arbor Plastics or any other third party using the Ann Arbor Plastics Web site is non-confidential. By submitting any solicited or unsolicited information using the Ann Arbor Plastics Web site, you grant Ann Arbor Plastics an irrevocable and unrestricted license to use, modify, reproduce, transmit, display and distribute such materials, information, suggestions, ideas or comments for any purpose whatsoever to the extent permitted by law.Notification of Copyright Infringement Under the Digital Millennium Copyright Act
If you believe that your copyrighted material may have been infringed, please provide Ann Arbor Plastics' Copyright Agent with the following information in writing:
The Ann Arbor Plastics Web site is created, operated and controlled by Ann Arbor Plastics in the State of Michigan, United States of America. The laws of the State of Michigan will govern the Legal Notices and Conditions of Use without giving effect to any principles or conflicts of laws.Links to Third-Party Web Sites
The Ann Arbor Plastics Web site contains links to other sites operated by third-parties. These links are available for your convenience and are intended only to enable access to these Third-Party Sites and for no other purpose.
Ann Arbor Plastics does not warrant or make any representation about the substance, quality, functionality, accuracy, fitness for a particular purpose, merchantability or any other representation about any Third-Party Site or its content. A link to a Third-Party Site on the Ann Arbor Plastics Web site does not constitute sponsorship, endorsement, approval or responsibility for any Third-Party Site. Ann Arbor Plastics makes no representation or warranty as to any products or services offered on any Third-Party Site.
If you use this site, you are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer. You agree to accept responsibility for all activities that occur under your account and password.
The Ann Arbor Plastics Web site may only be used for lawful purposes. Activities including, but not limited to, tampering with the site, misrepresenting the identity of a user, using buying agents or conducting fraudulent activities on the site are prohibited.
Users are prohibited from violating or attempting to violate the security of the Ann Arbor Plastics Web site, including, without limitation, (a) accessing data not intended for such user or logging onto a server or an account which the user is not authorized to access; (b) using the web site for unintended purposes or trying to change the behavior of the site; (c) attempting to probe, scan or test the vulnerability of a system or network or breach security or authentication measures without proper authorization; (d) attempting to interfere with service to any user, host or network, including without limitation via means of submitting a virus to the site, overloading, "flooding," "spamming," "mailbombing" or "crashing;"; (f) forging any TCP/IP packet header or any part of the header information in any e-mail or newsgroup posting. Violations of system or network security may result in civil or criminal liability; or (g) forging communications on behalf of the Web site (impersonating the Ann Arbor Plastics Web site) or to the Web site (impersonating as a legitimate user). Sending unsolicited and unauthorized e-mail on behalf of Ann Arbor Plastics, including promotions and/or advertising of products or services, is expressly prohibited. Violations of system or network security may result in civil or criminal liability.
You agree not to use any device, software or routine or data to interfere or attempt to interfere with the proper working of the Ann Arbor Plastics Web site or any activity being conducted on this site. You agree, further, not to use or attempt to use any engine, software, tool, agent, data or other device or mechanism (including without limitation browsers, spiders, robots, avatars or intelligent agents) to navigate or search the Ann Arbor Plastics Web site other than the search engine and search agents provided by Ann Arbor Plastics or generally publicly available browsers.Export
Certain software or other materials ("Software") that you may download from the Ann Arbor Plastics Web site may be further subject to United States Export Controls. No Software from the Ann Arbor Plastics Web site may be downloaded or exported contrary to any applicable export law, including but not limited to any applicable prohibitions against download or export as follows: 1) into (or to a national or resident of) Cuba, Iran, Iraq, Libya, North Korea, Syria or any other country to which the United States has embargoed goods; or 2) anyone on the United States Treasury Department's list of Specially Designated Nationals or the U.S. Commerce Department's Table of Deny Orders. By downloading or using Software downloaded from the Ann Arbor Plastics Web site, you agree to abide by the applicable laws, rules and regulations — including, but not limited to the Export Administration Act and the Arms Export Control Act — and you represent and warrant that you will not transfer, by electronic transmission or otherwise, this Software to a foreign national or a foreign destination in violation of the law.Owner and Operator of The Ann Arbor Plastics Web site
aaplastics.com is the owner and operator of the Ann Arbor Plastics Web site. aaplastics.com, is a subsidiary of Ann Arbor Plastics, Inc.
The Ann Arbor Plastics Web site address is www.aaplastics.com. The mailing address for aaplastics.com is 815 Woodland Drive, Saline, Michigan 48176.
Last revision date: January 5th, 2009